Tangential, but I have sleep apnea. Fortunately I have it mild enough to get away with a mouthpiece instead of a CPAP (which is good anyway because I also have bruxism).
The mouthpiece works great and I would recommend everyone get tested for sleep apnea if your insurance covers it, but I have to admit that paying for it bothered me. Even with insurance covering some of it, it cost me about $600.
I know that there's a deceptively high amount of engineering required for these kinds of things, but it was very hard to wrap my head around paying $600 for what amounted to a couple pieces of clear plastic. I actually got them to send me the STL of the scan of my teeth, and some back of napkin math indicated that it would have cost me about fifteen cents of resin to print it out myself. Instead I'm paying about 4000x that price.
Obviously this is not apples to apples, I'm sure they're using different and/or better resin that what I have, and as I said there's probably engineering and fine-tuning for this, but even still it was not fun to pay for.
All the same, I sleep like 10x better, so I suppose that considering that $600 is a cheap price to pay.
> I know that there's a deceptively high amount of engineering required for these kinds of things
I think there's a deceptively low amount of engineering required for most medical and medical-adjacent tech. The high costs are rooted in pervasive industry-wide centuries-long FUD campaigns.
So shouldn't this really be something that could be opened sourced. I think I've seen a few write ups of people that did their own, but seems like a highly functional implementation could be democratized.
It is definitely not that simple for a number of reasons.
Yes, aligners and retainers in theory may be printed on some commercially available hardware. At your own risk, because you will be printing a medical device and you will need:
1. A treatment plan: simulated movement of teeth at every step, taking into account all forces. That’s specialized software or external lab service.
2. Precision. You put too much pressure at the wrong angle and you will need a surgery to fix the damage, because the tooth root moved in wrong direction.
3. Plastic. You cannot use ordinary 3D printer ink. You need a plastic that can survive the chemical environment in your mouth, maintain the pressure, and you probably want it to look good (no discoloration etc).
4. Finish: Align Tech, Straumann etc do not stop after 3D printing, there are few other steps involved to make sure there’s no sharp edges etc.
5. Maybe you will need attachments (to focus pressure in the right direction on certain teeth) or wires.
Align Tech is Apple of clear aligners, but now competition exists, producing aligners at scale is commercially more efficient, considering all the risks and required qualifications, and of course the best materials for aligners are patented and not sold OTC to everyone.
Disclosure: I worked at Align 10 years ago and later was CTO of European DTC competitor.
How many of these risks and problems are exaggerated in scope and potential due to both a desire for a regulatory moat and a general fear of litigation in the medical space?
That is to say, how good is “good enough” when done at small-scale in developing nations or medically underserved communities?
These kinds of things can slowly move your bone structure over time. After all, that is their entire point. You don't want to accidentally mess up your teeth and jaw even more.
IIRC, yes. It’s been some time ago, I don’t know how manufacturing looks now. It’s different process compared to 3D printing at home. It doesn’t mean it should be different, it just has to maintain certain properties. I’m not chemical or bioengineer to go into detail of it :)
I did Invisalign a few years ago. Manufacturing the retainers is surely only a small part of the puzzle.
They used a specialized sort of 3D camera on a stick to get an incredibly accurate model of my mouth, any open source solution would need an equivalent. And you’d also need open source code from somewhere to work out which teeth need to move where and at what stage in the treatment.
They also use this camera system when creating implants. After the implant post was installed, they scan your mouth to determine the optimum shape for your crown (that goes on the post).
Dry heaving would have been great. I would regularly vomit from impressions. My orthodontist would just prepare two sets if impression trays, cause the first one was going to go in the medical waste bin.
Impressions for invisilign (when I did it, about a million years ago) weren't so bad though. Unfortunately invisilign resulted in an open bite for my molars, which I really should go back to an orthodontist to address, but I'd rather not.
>The difficult part is not the manufacturing, but knowing how to do it properly so you don’t harm the patient.
And yet I read plenty of horror stories of bad orthodontic results. Ask me how I know.
Went to 3 different orthodontist to fix what a bad orthodontist did to me when I was a kid, and each gave me a completely different treatment plan. I feel like being an orthodontist is just eyeballing and patching your way as you go to an acceptable resolution.
A point I didn’t see sibling comments make is that the dentist often has to file between teeth for them to sit and align correctly. They did so several times in my case. I would not want to do that to myself!
Certainly it's not impossible to DIY, but it's more difficult than just popping some aligners on your 3d printer.
Manufacturing them requires a resin printer and a vacuforming setup, but that's still the easy part. It's a whole system with a dental 3D scanner, software for rearranging your mouth, and attachment points that have to be epoxied onto (and later removed from) your teeth by a dentist.
They have to have at least 2 different materials as well. The temporary trays were much softer and I had almost ground through them in my sleep by the time I had to switch to the next one but the final set is much more robust.
It’s been tried, with some success. Pretty sure I’ve seen a post here on HN from someone that DIy’d it end to end.
But it’s also something that’s not responsible to shortcut. Shifting teeth around too fast can result in permanent root damage and even loss of teeth. There was a whole cottage industry in the US for a while focused on under cutting Invisalign with a reverse-engineered product, but they often moved on accelerated treatment timelines that caused a not-insignificant amount of harm to patients, and cut corners on intake (DIY at home mold kits) that also contributed to problems. Pretty sure all of the companies doing this are basically dead now.
Need expensive printers and you need CAD software that can correctly move the teeth. Also not all it can be done by software, sometimes you need to blank out certain teeth that dentist will make the call.
If you keep them on soft food young, the jaw muscles don't get stimulated enough to grow so that the teeth that are coming out sit properly. Misalignment and opportunity for decay ensues.
If you give them decently hard food early on in life you solve most problems.
After that it can still happen but there's less chance.
Tangential, but I have sleep apnea. Fortunately I have it mild enough to get away with a mouthpiece instead of a CPAP (which is good anyway because I also have bruxism).
The mouthpiece works great and I would recommend everyone get tested for sleep apnea if your insurance covers it, but I have to admit that paying for it bothered me. Even with insurance covering some of it, it cost me about $600.
I know that there's a deceptively high amount of engineering required for these kinds of things, but it was very hard to wrap my head around paying $600 for what amounted to a couple pieces of clear plastic. I actually got them to send me the STL of the scan of my teeth, and some back of napkin math indicated that it would have cost me about fifteen cents of resin to print it out myself. Instead I'm paying about 4000x that price.
Obviously this is not apples to apples, I'm sure they're using different and/or better resin that what I have, and as I said there's probably engineering and fine-tuning for this, but even still it was not fun to pay for.
All the same, I sleep like 10x better, so I suppose that considering that $600 is a cheap price to pay.
> All the same, I sleep like 10x better, so I suppose that considering that $600 is a cheap price to pay.
First time?
Price is not determined by cost to produce.
It’s determined by the price a customer is willing to pay.
> I know that there's a deceptively high amount of engineering required for these kinds of things
I think there's a deceptively low amount of engineering required for most medical and medical-adjacent tech. The high costs are rooted in pervasive industry-wide centuries-long FUD campaigns.
So shouldn't this really be something that could be opened sourced. I think I've seen a few write ups of people that did their own, but seems like a highly functional implementation could be democratized.
It is definitely not that simple for a number of reasons. Yes, aligners and retainers in theory may be printed on some commercially available hardware. At your own risk, because you will be printing a medical device and you will need:
1. A treatment plan: simulated movement of teeth at every step, taking into account all forces. That’s specialized software or external lab service.
2. Precision. You put too much pressure at the wrong angle and you will need a surgery to fix the damage, because the tooth root moved in wrong direction.
3. Plastic. You cannot use ordinary 3D printer ink. You need a plastic that can survive the chemical environment in your mouth, maintain the pressure, and you probably want it to look good (no discoloration etc).
4. Finish: Align Tech, Straumann etc do not stop after 3D printing, there are few other steps involved to make sure there’s no sharp edges etc.
5. Maybe you will need attachments (to focus pressure in the right direction on certain teeth) or wires.
Align Tech is Apple of clear aligners, but now competition exists, producing aligners at scale is commercially more efficient, considering all the risks and required qualifications, and of course the best materials for aligners are patented and not sold OTC to everyone.
Disclosure: I worked at Align 10 years ago and later was CTO of European DTC competitor.
How many of these risks and problems are exaggerated in scope and potential due to both a desire for a regulatory moat and a general fear of litigation in the medical space?
That is to say, how good is “good enough” when done at small-scale in developing nations or medically underserved communities?
These kinds of things can slowly move your bone structure over time. After all, that is their entire point. You don't want to accidentally mess up your teeth and jaw even more.
Smile Direct Club and co have shown its founded 100% in real risk of harm.
They were a company theoretically doing the same thing with still more resources than an average individual has, and ruined people's bites and teeth.
I don't think there's a good enough here
Per point #3, aren't the liners thermo formed around at 3d printed model of your teeth?
IIRC, yes. It’s been some time ago, I don’t know how manufacturing looks now. It’s different process compared to 3D printing at home. It doesn’t mean it should be different, it just has to maintain certain properties. I’m not chemical or bioengineer to go into detail of it :)
I did Invisalign a few years ago. Manufacturing the retainers is surely only a small part of the puzzle.
They used a specialized sort of 3D camera on a stick to get an incredibly accurate model of my mouth, any open source solution would need an equivalent. And you’d also need open source code from somewhere to work out which teeth need to move where and at what stage in the treatment.
They also use this camera system when creating implants. After the implant post was installed, they scan your mouth to determine the optimum shape for your crown (that goes on the post).
That’s pretty wild. I got a mould taken with some sort of a putty .
I wear a night guard and have had them made both ways.
The 3D camera was really neat. A little faster, and I didn’t once dry heave.
I could watch the software and a 3D model slowly form of my mouth. Looked surprisingly user friendly. Missed areas were highlighted, for example.
> A little faster, and I didn’t once dry heave.
Dry heaving would have been great. I would regularly vomit from impressions. My orthodontist would just prepare two sets if impression trays, cause the first one was going to go in the medical waste bin.
Impressions for invisilign (when I did it, about a million years ago) weren't so bad though. Unfortunately invisilign resulted in an open bite for my molars, which I really should go back to an orthodontist to address, but I'd rather not.
>They used a specialized sort of 3D camera on a stick to get an incredibly accurate model of my mouth
AFAIK Align's 3D scanning system is more or less branched from the same Israeli tech that went into the Xbox 360 kinect camera and the iPhone face-ID.
Orthodontics is simply “making a retainer” the same way orthopedics is simply “putting screws in a leg”.
The difficult part is not the manufacturing, but knowing how to do it properly so you don’t harm the patient.
>The difficult part is not the manufacturing, but knowing how to do it properly so you don’t harm the patient.
And yet I read plenty of horror stories of bad orthodontic results. Ask me how I know.
Went to 3 different orthodontist to fix what a bad orthodontist did to me when I was a kid, and each gave me a completely different treatment plan. I feel like being an orthodontist is just eyeballing and patching your way as you go to an acceptable resolution.
Given that, shouldn't you be even more concerned about people YOLOing it, if even highly trained orthodontists are regularly screwing this up?
A point I didn’t see sibling comments make is that the dentist often has to file between teeth for them to sit and align correctly. They did so several times in my case. I would not want to do that to myself!
Certainly it's not impossible to DIY, but it's more difficult than just popping some aligners on your 3d printer.
Manufacturing them requires a resin printer and a vacuforming setup, but that's still the easy part. It's a whole system with a dental 3D scanner, software for rearranging your mouth, and attachment points that have to be epoxied onto (and later removed from) your teeth by a dentist.
They have to have at least 2 different materials as well. The temporary trays were much softer and I had almost ground through them in my sleep by the time I had to switch to the next one but the final set is much more robust.
Yeah it's also not unreasonably expensive. At least when I had them it was only a few thousand pounds. I think they do offers regularly.
It’s been tried, with some success. Pretty sure I’ve seen a post here on HN from someone that DIy’d it end to end.
But it’s also something that’s not responsible to shortcut. Shifting teeth around too fast can result in permanent root damage and even loss of teeth. There was a whole cottage industry in the US for a while focused on under cutting Invisalign with a reverse-engineered product, but they often moved on accelerated treatment timelines that caused a not-insignificant amount of harm to patients, and cut corners on intake (DIY at home mold kits) that also contributed to problems. Pretty sure all of the companies doing this are basically dead now.
https://amosdudley.com/weblog/Ortho
Need expensive printers and you need CAD software that can correctly move the teeth. Also not all it can be done by software, sometimes you need to blank out certain teeth that dentist will make the call.
Most teeth align themselves as kids age. This is almost never necessary.
Yes, the 12 billion dollar company must be doing something that no one needs.
There are folks working on solutions for when teeth do not align themselves.
Depends on diet.
If you keep them on soft food young, the jaw muscles don't get stimulated enough to grow so that the teeth that are coming out sit properly. Misalignment and opportunity for decay ensues.
If you give them decently hard food early on in life you solve most problems.
After that it can still happen but there's less chance.
How early on in life?
Ok, sure, it's usually cosmetic. So what?